MULLINAHONE GENERAL CATALOGUE 2024

CLIPPING MACHINES & BLADES

Code Cutter Head Aesculap Blade Sets FAVORITA Ref No.

Coat Length

PET06001 PET06002 PET06003 PET06004 PET06005 PET06006 PET06007 PET06008 PET06009 PET06010 PET06013 PET06012 PET06014 PET06011 PET06015

GH703

GT730

GH700

50

0.05 mm

GH700 GH703 GT730 GT772 GH712 GT736 GT746 GT710 GH715 GT742 GT749

40

0.1 mm

30

0.5 mm 3.2 mm

5/8”

GT736

GT772

GH712

1 mm 1 mm

15

1.5 mm

1.8 mm Favorita System GT746

GT710

GH715

10

9

2 mm

2 mm Aesculap Cutter head with DLC coating Favorita The Aesculap „Diamond-like Carbon“ (DLC) coating ideally combines the property profiles of diamond- and Tefl surface enhancement. This special coating guarantees outstanding product properties: • high wear protection and longer service life • excellent gliding thanks to minimised frictional resistance • extended edge retention • increased corrosion protection • reduced care requirement thanks to dirt-repellent surface 2.8 mm GT742 GT749 GT748 GT754 GT758 GT770 3 mm 3 mm 5 mm 7 mm

9

10 Wide

8.5F 8.5 5F

GT748 GT758 GT754

GT770

7F

PET06017 PET06016 PET06018

3 4F

12 mm 9 mm 16 mm

GT779 GT784 GT782

GH700D

5/8”

GT779 The advantages of the Favorita system naturally also apply to these cutter heads with DLC coating.

GT782

GT784

Aesculap Blade Sets FAVORITA with DLC coating The Aesculap „Diamond-like Carbon“ (DLC) coating ideally combines the property profiles of diamond- and Teflon-based surface enhancement. This special coating guarantees outstanding product properties: • High wear protection and longer service life. • Excellent gliding thanks to minimised frictional resistance. • Extended edge retention. • Increased corrosion protection. • Reduced care requirement thanks to dirt-repellent surface. GT770D

GT754D

GT779D

DLC Coating “Diamond-like Carbon ”

Code

Ref No.

Cutter Head Coat Length Ref. no.

Shearing height

Shear width

€

PET06019 PET06020 PET06021 PET06022 PET06023 PET06024

50

0.05 mm

GH700 GH703 GT730 GT772 GH712 GT736

GH700D GH703D GT754D GT758D GT770D GT779D

0,05 mm 0,1 mm

40 mm 40 mm 40 mm 40 mm 40 mm 40 mm

1/10/100 1/10/100 1/10/100 1/10/100 1/10/100 1/10/100

NEW NEW

40

0.1 mm

3 mm 5 mm 7 mm 9 mm

GT754D

GH700D

GH703D

8.5

3 mm 5 mm

5F

7F

7 mm 9 mm

4F

GT758D

GT770D

GT779D

The tooth spaces must be given a thorough cleaning. When using a disinfectant, the cutting blade should be dried thoroughly to prevent corrosion. The blade must be oiled after cleaning. Cleaning & maintenance of FAVORITA Clipper Blades. Care steps for Favorita Clipper Heads

The tooth s cleaning. W head shoul corrosion. T cleaning.

Disassembly

Cleaning

Drying

Oiling

89